Product ID:RTV SILICONE ADHESIVE (AI 100 SILICONE)
MSDS Date:11/07/1994
FSC:5970
NIIN:01-099-1446
Status Code:A
MSDS Number: CKMLP

ACCUMETRIC INC.

350 RING ROAD
ELIZABETHTOWN, KY 42701
US

Emergency Phone: 800-928-2677

Info Phone: 502-769-3385

Cage: 58149

NESTOR SALES INC DBA ACE TOOL CO

LARGO, FL 33777 US

Telephone: 727-544-6114

Cage: 1X015

METHYLTRIACETOXYSILANE

CAS: 4253-34-3

RTECS: VV4500000

ETHYLTRIACETOXYSILANE

CAS: 17689-77-9

SILICA

CAS: 7631-86-9

ACGIH TLV: 10 MG/M3

POLYDIMETHYSILOXANE

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE KNOWN.
Effects of Overexposure:INGESTION: MAY CAUSE STOMACH DISCOMFORT. SKIN
CONTACT: UNCURED PRODUCT MAY IRRITATE LIPS, GUMS, TONGUE, AND SKIN.
EYE CONTACT: UNCURED PRODUCT CONTACT IRRITATE EYES.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES. OBTAIN MEDICAL
ATTENTION. SKIN: WIPE OFF AND FLUSH WITH WATER. INHALATION: REMOVE
TO FRESH AIR. OBTAIN MEDICAL ATTENTION. ORAL: OBTAIN MEDICAL
ATTENTION.

Flash Point Method:OC
Flash Point:=100.C, 212.F
Lower Limits:N/D
Upper Limits:N/D
Extinguishing Media:WATER, WATER FOG, CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING FIRES INVOLVING
CHEMICALS.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:REMOVE PRODUCT AND USE ABSORBENT MATERIAL TO
TAKE CARE OF ANY OIL-LIKE RESIDUES.

Handling and Storage Precautions:STORE BELOW 90 F. USE REASONABLE CARE
AND CAUTION.
Other Precautions:NONE KNOWN.

Respiratory Protection:ACID GAS/ORGANIC VAPOR TYPE.
Ventilation:LOCAL: NONE. MECHANICAL: NONE.
Protective Gloves:CHEMICAL WORKERS GLOVES
Eye Protection:SAFETY GOGGLES WITH SIDE SHIELD.
Other Protective Equipment:NONE
Work Hygienic Practices:GROSS AMOUNT OF MATERIAL SHOULD BE REMOVED FROM
THE SKIN AS SOON AS PRACTICAL, ESPECIALLY BEFORE EATING OR SMOKING.
Supplemental Safety and Health
PART NUMBER USED BY VENDOR: DC-732-CLEAR.

HCC:N1
Vapor Pres:<5 MM
Spec Gravity:1.04
Evaporation Rate & Reference:<1
Solubility in Water:<0.1%
Appearance and Odor:ACETIC ACID-LIKE PASTE

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION.
Stability Condition to Avoid:AIR OR MOISTURE CAUSES POLYMERIZATION AND
ACETIC ACID VAPORS ARE FORMED.
Hazardous Decomposition Products:SILICONE DIOXIDE, CARBON DIOXIDE, AND
TRACES OF INCOMPLETELY BURNED CARBON PRODUCTS.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:REVIEW ALL LOCAL, STATE, AND FEDERAL REGULATIONS
CONCERNING HEALTH AND POLLUTION TO DETERMINE APPROVED DISPOSAL
METHOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.